Dripillow Drip and Leak Pad
Description
Dripillow spill pads are engineered to be a portable drip-pan to protect from outdoor drips and leaks.
- Portable drip-pan to eliminate drips from vehicles, hydraulic lines, or equipment
- Compatible with all fuels and hydrocarbons
- Weighted base prevents flips and splashes
- Corner gromets for anchoring
- UV resistant and removable pads
- Withstands harshest weather conditions
- Foldable with straps for easy carrying and storage
- Refill pads available
- Custom materials and sizes available
| Part Number | Dimensions LxW in. (cm.) |
Weight lb. (kg.) |
Absorb Capacity* gal. (L.) |
| 5650-YE | 22×22 (51×51) | 6 (2.7) | 1 (3.8) |
| 5660-YE | 24×36 (61×91) | 7 (3.1) | 2 (7.6) |
| 5670-YE | 24×54 (61×137) | 8 (3.6) | 3 (11.4) |
| 5680-YE | 38×42 (96×107) | 10 (4.5) | 4 (15.1) |
| 5690-YE | 36×36 (91×91) | 9 (4.1) | 4 (15) |
| 5691-YE | 36×72 (91×183) | 14 (6.3) | 10 (38) |
| 5692-YE | 48×48 (122×122) | 18 (8.1) | 8 (30) |
| 5693-YE | 48×60 (122×152) | 20 (9.1) | 12 (45) |
*The spill capacity is based on dimensions, low flow rate, a level surface and no displaced volume.
WARNING: This product can expose you to chemicals including DINP, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Additional information
| Dimensions | 22×22 (51×51), 24×36 (61×91), 24×54 (61×137), 38×42 (96×107), 36×36 (91×91), 36×72 (91×183), 48×48 (122×122), 48×60 (122×152) |
|---|
Related products
-
Tracmat™ For 36′ x 50′ Stinger Spillpal
Tracmat™ For 36′ x 50′ Stinger Spillpal
For Stinger Spillpal: 36'x50'
Placed inside the Stinger Spillpal, allowing trucks to drive in and out while protecting the berm from punctures and tears.
-
Hazmat Pad™
-
12″ Snap Berm Deluxe Repair Kit
-
Tri-Star Max – 42′ x 13′ x 9″ Spill Containment System for HEMTT Refueler Tanker
Tri-Star Max – 42′ x 13′ x 9″ Spill Containment System for HEMTT Refueler Tanker
The Tri-Star OPS was designed to be a permanent steel spill containment system that can be relocated without any dismantling required. The original purpose of the Tri-Star OPS was to create a one-pieces system large enough to handle a HEMMT Refueler for the Army. Standard size of the system is 40' x 11'11″ x 8 5/8″H and designed specifically to contain the HEMMT Refueler. However the length and wall height of the system can be decreased as needed. The Tri-Star OPS is constructed of a 1/4″ Steel.
Reviews
There are no reviews yet.